Korean Institute of Surface Engineering

pISSN : 1225-8024 | eISSN : 3399-8403


Journal of the Korean Institute of Surface Enginee 2021 12 ;54(6):

공학

Prospects on the Use of Corrosion Rate Measurement Method for Stainless Steel
스테인리스 강의 부식 측정방법의 이용과 전망

최용선, 이재원, 박은옥, 이기영*
[Yongseon Choi, Jaewon Lee, Eunoak Park, Kiyoung Lee*]

인하대학교 화학 화학공학융합학과
Department of Chemistry and Chemical Engineering, Inha University, Incheon 22212, Korea

한국표면공학회지, Vol. 54, No. 6, pp. 294-301.

DOI : 10.5695/JKISE.2021.54.6.294

The Effect of electron beam surface irradiation on the properties of SnO2/Ag/SnO2 thin films
전자빔 표면 조사에 따른 SnO2/Ag/SnO2 박막의 특성 연구

장진규a,†, 김현진a, 최재욱a, 이연학a, 공영민a, 허성보b, 김유성c,†, 김대일a,*
[Jin-Kyu Janga,†, Hyun-Jin Kima, Jae-Wook Choia, Yeon-Hak Leea, Young-Min Konga, Sung-Bo Heob, Yu-Sung Kimc,†, Daeil Kima,*]

a 울산대학교 첨단소재공학부 b 한국생산기술연구원 동남본부 첨단하이브리드생산기술센터 c 한국생산기술연구원 울산본부 첨단정형공정그룹
a School of Materials Science and Engineering, University of Ulsan, Ulsan 44776, Korea b Korea Institute of Industrial Technology, Yangsan 50635, Korea c Korea Institute of Industrial Technology, Ulsan 44413, Korea

한국표면공학회지, Vol. 54, No. 6, pp. 302-306.

DOI : 10.5695/JKISE.2021.54.6.302

Improved Adhesion of DLC Films by using a Nitriding Layer on AISI H13 Substrate

[Min-Seok Park1,2, Dae-Young Kim1,2, Chang-Seouk Shin3, Wang Ryeol Kim4,*]

1Ness Co, Busan, Republic of Korea 2Mechanical Engineering, Pukyong National University, Busan, Republic of Korea 3School of Mechanical Engineering, Pusan National University, Busan, Republic of Korea 4Dongnam Division, Korea Institute of Industrial Technology, Yangsan, Republic of Korea

한국표면공학회지, Vol. 54, No. 6, pp. 307-314.

DOI : 10.5695/JKISE.2021.54.6.307

Effect of Ultrasonic Process of Electroless Ni-P-Al2O3 Composite Coatings

[Jin-Doo Yoon1, Bon-Heun Koo1, Hwan-Il Hwang2, Sun-Kyo Seo3 and Jong-Kyu Park3* ]

1 School of Materials Science & Engineering, Changwon National University Changwon, 20 Changwondaehak-ro, Uichang-gu, Changwon-si, Gyeongsangnam-do, 51140, Korea 2Dept. of Smart Surface Procession, Namincheon Campus of KOREA POLYTECHNIC, Yeomjeon-ro 333 beon-gil, Michuhol-gu, Incheon, 22121, Korea 3SBP Surtech, B, 214 410 Jeongseojin-ro, Seo-gu, Incheon, 22689, Korea

한국표면공학회지, Vol. 54, No. 6, pp. 315-323.

DOI : 10.5695/JKISE.2021.54.6.315

Evaluating the performance and characteristics of Rutile TiO2 thin film for Triboelectric Nanogenerator (TENG)
Triboelectric Nanogenerator (TENG)를 위한 Rutile TiO2 박막 성능 및 특성 평가

문지현a, ∇, 김한재a, ∇, 김효배a, *, 안지훈a, *
[Ji-Hyeon Moon a, ∇, Han-Jae Kim a, ∇, Hyo-Bae Kim a, *, Ji-Hoon Ahn a, *]

a한양대학교 ERICA 재료화학공학과
aDepartment of Materials Science and Chemical Engineering, Hanyang university, 55 Hanyangdaehak-ro, Sangnok-gu, Ansan 15588, Gyeonggi-do, Republic of Korea

한국표면공학회지, Vol. 54, No. 6, pp. 324-330.

DOI : 10.5695/JKISE.2021.54.6.324

Fabrication and Characterization of Ytterbium Silicates for Environmental Barrier Coating Applications
환경차폐코팅용 이터븀 실리케이트의 제조와 물성평가

최재형a, 김성원a,*
[Jae-Hyeong Choia, and Seongwon Kima,*]

a한국세라믹기술원 이천분원 엔지니어링세라믹센터
aEngineering Ceramics Center, Korea Institute of Ceramic Engineering and Technology, Icheon, Gyeonggi-do 17303, Korea

한국표면공학회지, Vol. 54, No. 6, pp. 331-339.

DOI : 10.5695/JKISE.2021.54.6.331

Synthesis of size-controlled ZnO tetrapods sizes using atmospheric microwave plasma system and evaluation of its photocatalytic property
대기압 마이크로웨이브 플라즈마를 이용한 다양한 크기의 ZnO tetrapod 합성 및 광촉매 특성 평가

허성규, 정구환*
[Sung-Gyu Heo and Goo-Hwan Jeong*]

강원대학교 대학원 신소재공학과
Department of Advanced Materials Science and Engineering, Graduate School of Kangwon National University, Chuncheon 24341, Republic of Korea

한국표면공학회지, Vol. 54, No. 6, pp. 340-347.

DOI : 10.5695/JKISE.2021.54.6.340

A Study on Nitrogen Doping of Graphene Based on Optical Diagnosis of Horizontal Inductively Coupled Plasma
수평형 유도결합 플라즈마를 이용한 그래핀의 질소 도핑에 대한 연구

조성일, 정구환*
[Sung-Il Jo and Goo-Hwan Jeong*]

강원대학교 대학원 신소재공학과
Department of Advanced Materials Science and Engineering, Graduate School of Kangwon National University, Chuncheon 24341, Republic of Korea

한국표면공학회지, Vol. 54, No. 6, pp. 348-356.

DOI : 10.5695/JKISE.2021.54.6.348

Effect of fluorine gas addition for improvement of surface wear property of DLC thin film deposited by using PECVD
PECVD를 이용한 DLC 박막의 표면 마모 특성 향상을 위한 플루오린 첨가의 영향

박현준ab, 김준형c, 문경일a*
[Hyun-Jun Parkab, Jun-Hyung Kimc, Kyoung-Il Moona,*]

a한국생산기술연구원, b인하대학교 신소재공학과, c㈜풍산
aHeat Treatment R&D Group, Korea Institute of Industrial Technology, Gyeounggi-do 150014, Korea bDepartment of Materials Science and Engineering, Inha University, Incheon 22212, Korea cPoongsan Co., Ltd.,

한국표면공학회지, Vol. 54, No. 6, pp. 357-364.

DOI : 10.5695/JKISE.2021.54.6.357

Influence of Plasma Corrosion Resistance of Y2O3 Coated Parts by Cleaning Process
세정공정에 따른 Y2O3 코팅부품의 내플라즈마성 영향

김민중a,b, 신재수c, 윤주영b,d,*
[Minjoong Kima,b, Jae-Soo Shinc, Ju-Young Yunb,d,*]

a한양대학교 전기공학과, b한국표준과학연구원 진공소재측정팀 c대전대학교 에너지신소재공학과, d과학기술연합대학원대학교 NT-IT 융합
aDepartment of Electrical Engineering, Hanyang University, Seoul, 04763, Republic of Korea bVacuum Materials Measurement Team, Korea Research Institute of Standards and Science, Daejeon, 34113, Republic of Korea cDepartment of Energy&Advanced Materials Engineering, Daejeon University, Daejeon, 34520, Republic of Korea dDivision of Nano&Information Technology, University of Science and Technology, Seoul, 34113, Republic of Korea

한국표면공학회지, Vol. 54, No. 6, pp. 365-370.

DOI : 10.5695/JKISE.2021.54.6.365

Study on Evaluation of Degrease Performance on the Interface between Oil and Alloy
탈지 정도에 대한 방청유-금속 계면의 영향성 평가

최원영1, †, 김문수1, †, 유현석2, 송연균2, 정용균2, 최진섭1,*
[Wonyoung Choi1, † , Moonsu Kim1, †, Hyeonseok Yoo2, Yeongyun Song2, Yong-Gyun Jeong2, Jinsub Choi1, *]

1: 인하대학교 화학공학과; 2: 포스코 철강솔루션연구소
1: Department of Chemistry and Chemical Engineering, Inha University 22212, 100 Inha-ro, Michuhol-gu, Incheon, South Korea 2: Steel Solution Research Lab., POSCO 21985, 100 Songdogwahak-ro, Yeonsu-gu, Incheon, South Korea

한국표면공학회지, Vol. 54, No. 6, pp. 371-379.

DOI : 10.5695/JKISE.2021.54.6.371