Korean Institute of Surface Engineering

pISSN : 1225-8024 | eISSN : 3399-8403


공학

Structural and Luminescent Properties of Gd2WO6:RE3+ (RE = Dy, Sm, Dy/Sm) Phosphors for White Light Emitting Devices
백색광 소자 응용을 위한 Gd2WO6:RE3+ (RE = Dy, Sm, Dy/Sm) 형광체의 구조 및 발광 특성

박기원;정재용;조신호;
[Park, Giwon;Jung, Jaeyong;Cho, Shinho;]

신라대학교 신소재공학부;
Division of Materials Science and Engineering, Silla University;

한국표면공학회지, Vol. 53, No. 4, pp. 131-137.

DOI : 10.5695/JKISE.2020.53.4.131

The Micro Coil Production through Research on the Additive Conditions of Electrochemical Metal 3D Printer
전기화학적 금속 3D 프린터의 적층 조건 연구를 통한 마이크로 코일 제작

김영국;강동화;김성빈;유봉영;
[Kim, Young-Kuk;Kang, Donghwa;Kim, Sung-Bin;Yoo, Bongyoung;]

애니캐스팅;한양대학교 재료화학공학과;
Anycasting;Dept. of Materials and Chemical Engineering, Hanyang University;

한국표면공학회지, Vol. 53, No. 4, pp. 138-143.

DOI : 10.5695/JKISE.2020.53.4.138

Improvement of joining strength between aluminum alloy and polymer by two - step anodization

;;;
[Lee, Sung-Hyung;Yashiro, Hitoshi;Kure-Chu, Song-Zhu;]

Gakko hojin Kitahara gakuen;Department of Chemistry and Biological Science, Iwate University;Materials Function and Design, Nagoya Institute of Technology;

한국표면공학회지, Vol. 53, No. 4, pp. 144-152.

DOI : 10.5695/JKISE.2020.53.4.144

Photocatalytic decomposition of polyethylene composite film with TiO2 nanotube powders prepared by rapid breakdown anodization
급속 파괴 양극산화로 제조된 TiO2 나노 튜브 분말을 활용한 폴리에틸렌 복합 필름의 UV 광촉매 분해

임경민;김용태;최진섭;
[Lim, Kyungmin;Kim, Yong-Tae;Choi, Jinsub;]

인하대학교 화학공학과;
Department of Chemistry and Chemical Engineering, Inha University;

한국표면공학회지, Vol. 53, No. 4, pp. 153-159.

DOI : 10.5695/JKISE.2020.53.4.153

Fabrication and characterization of polymer-based carbon nanomaterial composites for thermal conductive adhesive application
열전도성 점착제 응용을 위한 고분자 기반 탄소나노소재 복합체 제조 및 특성 평가

이병주;조성일;윤은혜;이애리;이우영;허성규;황재성;정구환;
[Lee, Byeong-Joo;Jo, Sung-Il;Yoon, Eun-Hye;Lee, Ae-Ri;Lee, Woo-Young;Heo, Sung-Gyu;Hwang, Jae-Sung;Jeong, Goo-Hwan;]

강원대학교 대학원 신소재공학과;(주)태양 3C;
Department of Advanced Materials Science and Engineering, Graduate School of Kangwon National University;Taeyang 3C;

한국표면공학회지, Vol. 53, No. 4, pp. 160-168.

DOI : 10.5695/JKISE.2020.53.4.160

A brief review on the effect of impurities on the atomic layer deposited fluorite-structure ferroelectrics
원자층증착법으로 증착된 강유전성 플루오라이트 구조 강유전체 박막의 불순물 효과

이동현;양건;박주용;박민혁;
[Lee, Dong Hyun;Yang, Kun;Park, Ju Yong;Park, Min Hyuk;]

부산대학교 재료공학부;
Department of Materials Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 53, No. 4, pp. 169-181.

DOI : 10.5695/JKISE.2020.53.4.169

Preparation and characterization of silver nanowire transparent electrodes using shear-coating
Shear-coating을 사용한 은 나노와이어 투명 전극 제조 및 특성 분석

조경수;홍기하;박준식;정중희;
[Cho, Kyung Soo;Hong, Ki-Ha;Park, Joon Sik;Chung, Choong-Heui;]

한밭대학교 공과대학 소재시스템공학과;한밭대학교 공과대학 신소재공학과;
Department of Materials and Manufacturing Engineering, Hanbat National University;Department of Materials Science and Engineering, Hanbat National University;

한국표면공학회지, Vol. 53, No. 4, pp. 182-189.

DOI : 10.5695/JKISE.2020.53.4.182

Influence of Applied Current Density on Properties of Cu thin layer Electrodeposited from Copper Pyrophosphate Bath
피로인산동 도금용액으로부터 전기도금 된 Cu 도금층의 물성에 미치는 인가전류밀도의 영향

윤필근;박덕용;
[Yoon, Pilgeun;Park, Deok-Yong;]

한밭대학교 신소재공학과;
Department of Advanced Materials Engineering, Hanbat National University;

한국표면공학회지, Vol. 53, No. 4, pp. 190-199.

DOI : 10.5695/JKISE.2020.53.4.190