Korean Institute of Surface Engineering

pISSN : 1225-8024 | eISSN : 3399-8403


공학

Cyclic Oxidation Behavior of Vacuum Plasma Sprayed NiCoCrAlY Overlay Coatings
진공 플라즈마 용사법을 통해 형성된 NiCoCrAlY 오버레이 코팅의 반복 산화 거동

유연우;남욱희;박훈관;박영진;이성훈;변응선;
[Yoo, Yeon Woo;Nam, Uk Hee;Park, Hunkwan;Park, Youngjin;Lee, Sunghun;Byon, Eungsun;]

한국기계연구원 부설 재료연구소 표면기술연구본부;
Korea Institute of Materials Science, Surface Technology Division;

한국표면공학회지, Vol. 52, No. 6, pp. 283-288.

DOI : 10.5695/JKISE.2019.52.6.283

Effect of a ZnO Buffer Layer on the Structural, Optical and Electrical Properties of TIO/ZnO Bi-layered Films

;;;;
[Choe, Su-Hyeon;Park, Yun-Je;Choi, Jin-Young;Kim, Daeil;]

School of Materials Science and Engineering, University of Ulsan;

한국표면공학회지, Vol. 52, No. 6, pp. 289-292.

DOI : 10.5695/JKISE.2019.52.6.289

Corrosion Behaviors of Neutron-Irradiated Reactor Pressure Vessel Steels with Various Nickel and Chromium Contents
Ni과 Cr 함량이 다른 원자로 압력용기용 강의 중성자 조사 후 내식성 평가

최용;
[Choi, Yong;]

단국대학교 신소재공학과;
Department of Materials Science and Engineering, Dankook University;

한국표면공학회지, Vol. 52, No. 6, pp. 293-297.

DOI : 10.5695/JKISE.2019.52.6.293

Photoelectrochemical Properties of TiO2 Nanotubes by Well-Controlled Anodization Process
양극산화 제어에 의한 TiO2 나노튜브의 광전기화학 특성

정다솔;김동현;정현성;
[Jeong, Dasol;Kim, Donghyun;Jung, Hyunsung;]

한국세라믹기술원 나노소재 공정센터;
Nano Materials & Nano Technology Center, Korea Institute of Ceramic Engineering and Technology;

한국표면공학회지, Vol. 52, No. 6, pp. 298-305.

DOI : 10.5695/JKISE.2019.52.6.298

Influence of Rapid Thermal Annealing on the Opto-Electrical Performance of Ti-doped Indium Oxide Thin Films

;;
[Choe, Su-Hyeon;Kim, Daeil;]

School of Materials Science and Engineering, University of Ulsan;

한국표면공학회지, Vol. 52, No. 6, pp. 306-309.

DOI : 10.5695/JKISE.2019.52.6.306

Thickness Dependence of CVD-SiC-Based Composite Ceramic for the Mold of the Curved Cover Glass
곡면 커버 글라스용 금형 코팅을 위한 CVD-SiC 기반 세라믹 복합체의 두께에 따른 특성 연구

김경호;정성민;이명현;배시영;
[Kim, Kyoung-Ho;Jeong, Seong-Min;Lee, Myung-Hyun;Bae, Si-Young;]

한국세라믹기술원 에너지환경본부;
Energy and Environmental Division, Korea Institute of Ceramic Engineering and Technology(KICET);

한국표면공학회지, Vol. 52, No. 6, pp. 310-315.

DOI : 10.5695/JKISE.2019.52.6.310

Effect of Boronizing on Inconel 625 Superalloy for Improving Mechanical Properties
보로나이징처리에 따른 Inconel 625 초합금강의 기계적 특성 향상

김대욱;김유성;이인식;차여훈;정경훈;차병철;
[Kim, Dae-Wook;Kim, Yu-Sung;Lee, In-Sik;Cha, Yeo-Hun;Jeong, Kyeong-Hoon;Cha, Byung-Chul;]

한국생산기술연구원 울산지역본부 첨단정형공정그룹;울산대학교 첨단소재공학부;
Advanced Manufacturing Process R&D Group, Ulsan Regional Division, Korea Institute of Industrial Technology(KITECH);School of Materials Science & Engineering, University of Ulsan;

한국표면공학회지, Vol. 52, No. 6, pp. 316-320.

DOI : 10.5695/JKISE.2019.52.6.316

Microstructure and Nano-hardness of SiC/C Multi-coated Layers on a Particulate Nuclear Fuel
입자 핵연료의 SiC/C 다층 도포층의 미세조직 및 극미세 경도 평가

최용;
[Choi, Young;]

단국대학교 신소재공학과;
Department of Materials Science and Engineering, Dankook University;

한국표면공학회지, Vol. 52, No. 6, pp. 321-325.

DOI : 10.5695/JKISE.2019.52.6.321

Fabrication of Mesoporous Carbon from Polyvinylidene Chloride(PVDC)-resin Precursor with Mg(OH)2 Template for Supercapacitor Electrode
슈퍼 커패시터용 전극을 위한 Polyvinylidene chloride(PVDC)-resin과 Mg(OH)2 템플릿으로부터 메조기공 탄소의 제조

황버들;전상은;
[Hwang, Beodl;Chun, Sang-Eun;]

경북대학교 신소재공학부;
School of Materials Sciences and Engineering, Kyungpook National University;

한국표면공학회지, Vol. 52, No. 6, pp. 326-333.

DOI : 10.5695/JKISE.2019.52.6.326

Optical Properties of Metal Halide Perovskite Nanocrystals with Addition of Metal Bromide
금속 브롬화물의 첨가에 따른 금속 할라이드 페로브스카이트 나노결정의 광학적 특성 변화

윤석진;최지훈;
[Yun, Seokjin;Choi, Jihoon;]

충남대학교 신소재공학과;
Department of Materials Science and Engineering, Chungnam National University;

한국표면공학회지, Vol. 52, No. 6, pp. 334-341.

DOI : 10.5695/JKISE.2019.52.6.334

Pulsed DC Bias Effects on Substrate in TiNx Thin Film Deposition by Reactive RF Magnetron Sputtering at Room Temperature
반응성 RF 마그네트론 스퍼터링에 의한 TiNx 상온 성막에 있어서 기판 상의 펄스상 직류 바이어스 인가 효과

김세기;
[Kim, Seiki;]

한국세라믹기술원 이천분원 엔지니어링세라믹센터;
Engineering Ceramics Center, Korea Institute of Ceramic Engineering and Technology;

한국표면공학회지, Vol. 52, No. 6, pp. 342-349.

DOI : 10.5695/JKISE.2019.52.6.342

Effect of Mechanical Polishing Pretreatment on Tribological Properties of Manganese Phosphate Coating of Carbon Steel
기계적 연마 전처리가 인산망간 피막의 윤활 특성에 미치는 영향

김호영;노영태;전준혁;강호상;
[Kim, Ho-Young;Noh, Young-Tai;Jeon, Jun-Hyuck;Kang, Ho-Sang;]

한국건설생활환경시험연구원;삼화P&T;
Metal & Machinery Center, Korea Conformity Laboratories (KCL);SamHwa P&T Co., LTD;

한국표면공학회지, Vol. 52, No. 6, pp. 350-356.

DOI : 10.5695/JKISE.2019.52.6.350

Investigation of Synthesis Yield and Diameter Distribution of Single-Walled Carbon Nanotubes Grown at Different Positions in a Horizontal CVD Chamber
수평형 CVD 장치에서 기판 위치에 따른 단일벽 탄소나노튜브의 합성 수율 및 직경 분포 고찰

조성일;정구환;
[Jo, Sung-Il;Jeong, Goo-Hwan;]

강원대학교 대학원 신소재공학과;
Advanced Materials Science and Engineering, Graduate School of Kangwon National University;

한국표면공학회지, Vol. 52, No. 6, pp. 357-363.

DOI : 10.5695/JKISE.2019.52.6.357

Corrosion Resistance of Fe-Mn-Si-Ni-Cr-TiC Shape Memory Alloy for Reinforcement of Concrete
콘크리트 보강재용 Fe-Mn-Si-Ni-Cr-TiC계 형상기억합금의 내식성

주재훈;이현준;김도형;이욱진;이정훈;
[Joo, Jaehoon;Lee, Hyunjoon;Kim, Dohyoung;Lee, Wookjin;Lee, Junghoon;]

부경대학교 금속공학과;한국생산기술연구원;
Department of Metallurgical Engineering, Pukyong National University;Korea Institute of Industrial Technology;

한국표면공학회지, Vol. 52, No. 6, pp. 364-370.

DOI : 10.5695/JKISE.2019.52.6.364