Korean Institute of Surface Engineering

pISSN : 1225-8024 | eISSN : 3399-8403


공학

Arrayed Tip based Pattern Lithography with Built-in Capacitive Proximal Leveling Sensor
내장형 정전용량 근접 센서를 이용한 다중 팁 기반 패턴 인쇄

한윤수;
[Han, Yoonsoo;]

한국세라믹기술원 엔지니어링세라믹센터;
Engineering Ceramic Center, Korea Institute of Ceramic Engineering and Technology (Icheon);

한국표면공학회지, Vol. 52, No. 5, pp. 239-245.

DOI : 10.5695/JKISE.2019.52.5.239

High-temperature Corrosion of CrAlSiN Films in Ar/1%SO2 Gas

;;;;;
[Lee, Dong Bok;Xiao, Xiao;Hahn, Junhee;Son, Sewon;Yuke, Shi;]

School of Advanced Materials Science and Engineering, Sungkyunkwan University;Center for Materials and Energy Measurements, Korea Research Institute of Standards and Science;Department of Systems Management Engineering, Sungkyunkwan University;

한국표면공학회지, Vol. 52, No. 5, pp. 246-250.

DOI : 10.5695/JKISE.2019.52.5.246

Study of High Temperature Corrosion of Fe-Cr-W Steel in Coal-Biomass Co-firing Power Plant Environment
석탄-바이오매스 혼소발전 분위기에서 Fe-Cr-W 강의 고온부식 연구

김민정;샤오샤오;이동복;
[Kim, Min Jung;Xiao, Xiao;Lee, Dong Bok;]

성균관대학교 신소재공학과;
School of Advanced Materials Science and Engineering, Sungkyunkwan University;

한국표면공학회지, Vol. 52, No. 5, pp. 251-257.

DOI : 10.5695/JKISE.2019.52.5.251

Cu2O Thin Film Photoelectrode Embedded with CuO Nanorods for Photoelectrochemical Water Oxidation

;;
[Kim, Soyoung;Kim, Hyojin;]

Graduate School of Advanced Circuit Substrate Engineering, Chungnam National University;Department of Materials Science and Engineering, Chungnam National University;

한국표면공학회지, Vol. 52, No. 5, pp. 258-264.

DOI : 10.5695/JKISE.2019.52.5.258

Effect of Na3PO4 Concentration on The Formation Behavior of PEO films on AZ31 Mg Alloy
AZ31 Mg합금의 PEO피막 형성거동에 미치는 인산나트륨 농도의 영향

문성모;김주석;
[Moon, Sungmo;Kim, Juseok;]

재료연구소 표면기술연구본부;
Surface Technology Division, Korea Institute of Materials Science;

한국표면공학회지, Vol. 52, No. 5, pp. 265-274.

DOI : 10.5695/JKISE.2019.52.5.265

Enhanced Properties of Aluminum Oxide Layers with Post Heat Treatment
후열처리에 의한 알루미늄 산화층의 특성 향상

전윤남;김상준;박지현;정나겸;
[Jeon, Yoonnam;Kim, Sangjun;Park, Jihyun;Jeong, Nagyeom;]

영광YKMC 기술연구소;
R&D center, YKMC Inc.;

한국표면공학회지, Vol. 52, No. 5, pp. 275-281.

DOI : 10.5695/JKISE.2019.52.5.275