Korean Institute of Surface Engineering

pISSN : 1225-8024 | eISSN : 3399-8403


공학

Quantitative Analysis of the Amount of Aluminium Dissolved in Phosphoric Acid

;;
[Moon, Sungmo;Yang, Cheolnam;]

Surface Technology Division, Korea Institute of Materials Science;

한국표면공학회지, Vol. 50, No. 4, pp. 231-236.

DOI : 10.5695/JKISE.2017.50.4.231

Characterization of RF Sputter-deposited Sodium Phosphorous Oxynitride Thin Films as a Solid-state Sodium-ion Conductor

;
[Chun, Sang-Eun;]

School of Materials Sciences and Engineering, Kyungpook National University;

한국표면공학회지, Vol. 50, No. 4, pp. 237-243.

DOI : 10.5695/JKISE.2017.50.4.237

Effect of Plating Conditions on Electroless Copper Plating on SiC Fabric
직조된 SiC 섬유에 무전해 구리도금 시 도금 조건의 영향

이기환;손유한;한태양;이경진;김혜성;한준현;
[Lee, Kee Hwan;Sohn, Youhan;Han, Taeyang;Lee, Kyung Jin;Kim, Hye Hung;Han, Jun Hyun;]

충남대학교 신소재공학과;충남대학교 응용화학공학과;부산대학교 나노메카트로닉스공학과;
Department of Materials Science & Engineering, Chungnam National University;Department of Chemical Engineering & Applied Chemistry, Chungnam National University;Department of Nanomechatronics Engineering, Pusan National University;

한국표면공학회지, Vol. 50, No. 4, pp. 244-250.

DOI : 10.5695/JKISE.2017.50.4.244

Corrosion Damage Characteristics of STS 304 for the Nuclear Power Plant with Chemical Decontamination Conditions in Permanganic and Oxalic Acid
과망간산과 옥살산 화학제염 공정 시 원전기기용 STS 304 의 부식 손상 특성

한민수;정광후;양예진;박일초;김기철;서범철;박주현;김성종;
[Han, Min-Su;Jung, Kwang-Hu;Yang, Ye-Jin;Park, Il-Cho;Kim, Ki-Chul;Seo, Bum-Chul;Park, Ju-Hyun;Kim, Seong-Jong;]

목포해양대학교 기관시스템공학부;한전KPS;
Division of Marine Engineering, Mokpo National Maritime University;KEPCO Plant Service&Engineering Co., LTD;

한국표면공학회지, Vol. 50, No. 4, pp. 251-258.

DOI : 10.5695/JKISE.2017.50.4.251

Electrochemical Corrosion Damage Characteristics of Alumium Alloy and Stainless Steel with Sea Water Concentration
알루미늄 합금 및 스테인리스강의 해수 농도 변화에 따른 전기화학적 부식 손상 특성

박일초;김영복;김성종;
[Park, Il-Cho;Kim, Young-Bok;Kim, Seong-Jong;]

목포해양대학교 기관시스템공학부;
Division of Marine Engineering, Mokpo National Maritime University;

한국표면공학회지, Vol. 50, No. 4, pp. 259-265.

DOI : 10.5695/JKISE.2017.50.4.259

Density and Corrosion Property Improvement of Zn-Mg Coatings by Controlling the Substrate Temperature during the Deposition
증착 기판 온도 제어에 따른 Zn-Mg 박막의 치밀도 및 내식성 향상에 관한 연구

송면규;라정현;김회근;이상율;
[Song, Myeon-Kyu;La, Joung-Hyun;Kim, Hoe-Kun;Lee, Sang-Yul;]

한국항공대학교 표면기술응용연구센터;
Center for Surface Technology and Applications, Department of Materials Engineering, Korea Aerospace University;

한국표면공학회지, Vol. 50, No. 4, pp. 266-271.

DOI : 10.5695/JKISE.2017.50.4.266

Enhancement of Surface Hardness and Corrosion Resistance of AISI 310 Austenitic Stainless Steel by Low Temperature Plasma Carburizing Treatment

;
[Lee, Insup;]

Department of Advanced Materials Engineering, Dongeui University;

한국표면공학회지, Vol. 50, No. 4, pp. 272-276.

DOI : 10.5695/JKISE.2017.50.4.272

Fabrication and Electrical Propertie of the Ferroelectric (K0.5Na0.5)NbO3
강유전체(K0.5Na0.5)NbO3의 제조 및 전기적 특성 분석

현준원;변재덕;
[Hyun, June Won;Byun, Jaeduk;]

단국대학교 물리학과;
Department of Physics, Dankook University;

한국표면공학회지, Vol. 50, No. 4, pp. 277-281.

DOI : 10.5695/JKISE.2017.50.4.277

Luminescence Properties of La2MoO6:RE3+ (RE = Eu, Sm) Phosphors Subjected to the Different Concentrations of Activator Ions
활성제 이온의 농도 변화에 따른 La2MoO6:RE3+ (RE = Eu, Sm) 형광체의 발광 특성

김가연;신종언;조신호;
[Kim, Gayeon;Shin, Johngeon;Cho, Shinho;]

신라대학교 신소재공학부;
Division of Materials Science and Engineering, Silla University;

한국표면공학회지, Vol. 50, No. 4, pp. 282-288.

DOI : 10.5695/JKISE.2017.50.4.282

CO2 Sensing Properties of SnO2-Cr2O3 Composite Nanofibers Via Electrospinning Method
전기방사법으로 합성된 SnO2-Cr2O3 복합나노섬유의 이산화탄소 가스감응 특성

이재형;김재훈;김진영;김상섭;
[Lee, Jae-Hyoung;Kim, Jae-Hun;Kim, Jin-Young;Kim, Sang Sub;]

인하대학교 신소재공학과;
Department of Materials Science & Engineering, Inha University;

한국표면공학회지, Vol. 50, No. 4, pp. 289-295.

DOI : 10.5695/JKISE.2017.50.4.289

Gas Sensing Properties of Au-decorated NiO Nanofibers
Au 촉매금속이 첨가된 NiO 나노섬유의 가스 검출 특성

강우승;
[Kang, Wooseung;]

인하공업전문대학 금속재료과;
Department of Metallurgical & Materials Engineering, Inha Technical College;

한국표면공학회지, Vol. 50, No. 4, pp. 296-300.

DOI : 10.5695/JKISE.2017.50.4.296