Korean Institute of Surface Engineering

pISSN : 1225-8024 | eISSN : 3399-8403


공학

Non-destructive Analysis of Nano-sized Crack Morphology of Electro-deposit by Using Small Angle Neutron Scattering
소각중성자 산란법을 이용한 도금층의 극미세 균열 형상의 비파괴적 분석

최용;신은주;한영수;성백석;
[Choi, Yong;Shin, Eun Joo;Hahn, Young Soo;Seung, Baik Seok;]

단국대학교 신소재공학과;한국원자력연구원 하나로팀;
Department of Materials Science and Engineering, Dankook University;HANARO, Korea Atomic Energy Research Institute;

한국표면공학회지, Vol. 49, No. 2, pp. 111-118.

DOI : 10.5695/JKISE.2016.49.2.111

Characterization of Ceramic Oxide Layer Produced on Commercial Al Alloy by Plasma Electrolytic Oxidation in Various KOH Concentrations

;;
[Lee, Jung-Hyung;Kim, Seong-Jong;]

Korea Testing & Research Institute(KTR);Division of Marine Engineering, Mokpo National Maritime University;

한국표면공학회지, Vol. 49, No. 2, pp. 119-124.

DOI : 10.5695/JKISE.2016.49.2.119

Effect of Current Density on Porous Film Formation in Two-Step Anodizing for Al Alloy

;;
[Lee, Seung-Jun;Kim, Seong-Jong;]

Department of Power System Engineering, Kunsan National University;Division of Marine Engineering, Mokpo National Maritime University;

한국표면공학회지, Vol. 49, No. 2, pp. 125-129.

DOI : 10.5695/JKISE.2016.49.2.125

Effects of Metal Anion Complexes in Electrolyte on the Properties of Anodic Oxide Films on ADC12 Al Alloy

;;;;
[Yoo, Hyeonseok;Lee, Chulho;Oh, Kiseok;Choi, Jinsub;]

Department of Chemistry and Chemical Engineering Center for Molecular Catalysts and Applications (BK21 plus program) Inha University;

한국표면공학회지, Vol. 49, No. 2, pp. 130-134.

DOI : 10.5695/JKISE.2016.49.2.130

Effect of the Mg Ion Containing Oxide Films on the Biocompatibility of Plasma Electrolytic Oxidized Ti-6Al-4V

;;
[Lee, Kang;Choe, Han-Cheol;]

Department of Dental Materials & Research Center of Nano-Interface Activation for Biomaterials & Research Center for Oral Disease Regulation of the Aged, School of Dentistry, Chosun University;

한국표면공학회지, Vol. 49, No. 2, pp. 135-140.

DOI : 10.5695/JKISE.2016.49.2.135

Deposition and Characterization of Electrophoretic Paint on AZ31 Magnesium Alloy

;;
[Nguyen, Van Phuong;Moon, Sungmo;]

Surface Technology Division, Korea Institute of Materials Science;

한국표면공학회지, Vol. 49, No. 2, pp. 141-146.

DOI : 10.5695/JKISE.2016.49.2.141

Corrosion of Fe-9%Cr-1%Mo Steel at 600 and 700℃ in N2/(0.5, 2.5)%H2S-mixed Gas

;;;;;;
[Lee, Dong Bok;Abro, Muhammad Ali;Yadav, Poonam;Bak, Sang Hwan;Shi, Yuke;Kim, Min Jung;]

School of Advanced Materials Science and Engineering, Sungkyunkwan University;

한국표면공학회지, Vol. 49, No. 2, pp. 147-151.

DOI : 10.5695/JKISE.2016.49.2.147

Effects of Plasma Treatment on Contact Resistance and Sheet Resistance of Graphene FET

;;;;
[Ra, Chang-Ho;Choi, Min Sup;Lee, Daeyeong;Yoo, Won Jong;]

SKKU Advanced Institute of Nano-Technology (SAINT), Samsung-SKKU Graphene Center (SSGC), Sungkyunkwan University;

한국표면공학회지, Vol. 49, No. 2, pp. 152-158.

DOI : 10.5695/JKISE.2016.49.2.152

Optimization of Operating Parameters and Components for Water Electrolysis Using Anion Exchange Membrane
음이온 교환막 알칼리 수전해를 위한 운전 조건 및 구성요소의 최적화

장명제;원미소;이규환;최승목;
[Jang, Myeong Je;Won, Mi So;Lee, Kyu Hwan;Choi, Sung Mook;]

한국기계연구원 부설 재료연구소 표면기술연구본부;
Surface Technology Department, Korea Institute of Materials Science;

한국표면공학회지, Vol. 49, No. 2, pp. 159-165.

DOI : 10.5695/JKISE.2016.49.2.159

The Characteristic Analysis of Calcareous Deposit Films Formed on Steel Plate by Cathodic Current Process in Marine Environment
해양환경 중 음극전류 프로세스에 의해 강판에 형성된 석회질 피막의 특성 분석

박준무;강재욱;최인혜;이승효;문경만;이명훈;
[Park, Jun-Mu;Kang, Jae Wook;Choi, In-Hye;Lee, Seung-Hyo;Moon, Kyung-Man;Lee, Myeong-Hoon;]

한국해양대학교 해사대학 기관공학부;한국해양대학교 공과대학 조선기자재공학과;
Division of Marine Engineering, Korea Maritime and Ocean University;Dept. of Marine Equipment Engineering, Korea Maritime and Ocean University;

한국표면공학회지, Vol. 49, No. 2, pp. 166-171.

DOI : 10.5695/JKISE.2016.49.2.166

Electrochemical Characteristics of Arc Thermal Sprayed Inconel 625 Coating on SS400 Steel in Seawater
Inconel 625로 아크 용사코팅된 SS400강의 해수 내 전기화학적 특성

박일초;김성종;
[Park, Il-Cho;Kim, Seong-Jong;]

목포해양대학교 기관시스템공학부;
Division of Marine Engineering, Mokpo National Maritime University;

한국표면공학회지, Vol. 49, No. 2, pp. 172-177.

DOI : 10.5695/JKISE.2016.49.2.172

Fabrication and Characterization of Film Type Light Guide Plates by UV Imprint Lithography
UV 임프린팅법에 의한 필름형 광도광판의 제조 및 특성 연구

김형관;김소원;이희철;
[Kim, Hyeong-Gwan;Kim, So-Won;Lee, Hee-Chul;]

한국산업기술대학교 신소재공학과;
Department of Advanced Materials Engineering, Korea Polytechnic University;

한국표면공학회지, Vol. 49, No. 2, pp. 178-185.

DOI : 10.5695/JKISE.2016.49.2.178

Transparent Photovoltaic Device using Two-dimensional Transition-metal Dichalcogenides
이차원 반도체 소재를 이용한 투명 태양전지 특성에 관한 연구

좌태헌;현철민;김민식;이혁주;안지훈;
[Jwa, Tae-Hun;Hyun, Chul-Min;Kim, Min-Sik;Lee, Hyeok-ju;Ahn, Ji-Hoon;]

한국해양대학교 전자소재공학과;
Department of Electronic Material Engineering, Korea Maritime and Ocean University;

한국표면공학회지, Vol. 49, No. 2, pp. 186-190.

DOI : 10.5695/JKISE.2016.49.2.186

Improved Properties of Li4Ti5O2 (LTO) by Surface Modification with Carbon Nanotube (CNT)
CNT 첨가를 통해 표면 처리한 LTO의 특성향상에 관한 연구

박수길;김청;;
[Park, Soo-Gil;Kim, Cheong;Habazaki, Hiroki;]

충북대학교 공업화학과;북해도대학교;
Department of Engineering Chemistry, Chungbuk National University;Faculty of Engineering, Hokkaido university;

한국표면공학회지, Vol. 49, No. 2, pp. 191-195.

DOI : 10.5695/JKISE.2016.49.2.191

Emission Characteristics of White Tandem Organic Light Emitting Diodes Using Blue and Red Phosphorescent Materials
청색과 적색 인광 물질을 사용한 백색 적층 OLED의 발광 특성

박찬석;주성후;
[Park, Chan-Suk;Ju, Sung-Hoo;]

대진대학교 신소재공학과;
Department of Advanced Materials Science & Engineering, Daejin University;

한국표면공학회지, Vol. 49, No. 2, pp. 196-201.

DOI : 10.5695/JKISE.2016.49.2.196

Influence of Heat Treatment and Magnesium Content on Corrosion Resistance of Al-Mg Coated Steel Sheet
PVD법에 의해 제작한 Al-Mg 코팅 강판의 내식성에 미치는 Mg 함량 및 열처리의 영향

강재욱;박준무;황성화;이승효;문경만;이명훈;
[Kang, Jae Wook;Park, Jun-Mu;Hwang, Sung-Hwa;Lee, Seung-Hyo;Moon, Kyung-Man;Lee, Myeong-Hoon;]

한국해양대학교 해사대학 기관공학부;한국해양대학교 공과대학 조선기자재 공학과;
Div. of Marine Engineering, Korea Maritime and Ocean University;Dept. of Marine Equipment Engineering, Korea Maritime and Ocean University;

한국표면공학회지, Vol. 49, No. 2, pp. 202-210.

DOI : 10.5695/JKISE.2016.49.2.202

Formation of Multi-Component Boride Coatings Containing V and/or Cr and Evaluation of Their Properties
바나듐 및 크롬을 포함하는 다 성분 Boride 코팅의 생성 및 특성 평가

이의열;윤상혁;김종하;
[Lee, Euiyeol;Yoon, Sanghyun;Kim, Jongha;]

안동대학교 신소재공학부 금속재료공학과;
Department of Materials Science and Engineering, Andong National University;

한국표면공학회지, Vol. 49, No. 2, pp. 211-217.

DOI : 10.5695/JKISE.2016.49.2.211

Characteristics of Thermal Radiation Pastes Containing Graphite and Carbon Nanotube
흑연 및 탄소나노튜브 혼합 방열도료의 특성

이지훈;송만호;강찬형;
[Lee, Ji Hun;Song, Man-Ho;Kang, Chan Hyoung;]

한국산업기술대학교 신소재공학과;(주)하나나노텍 기술연구소;
Department of Advanced Materials Engineering, Korea Polytechnic University;Technical Research Institute, Hana Nano Tech;

한국표면공학회지, Vol. 49, No. 2, pp. 218-224.

DOI : 10.5695/JKISE.2016.49.2.218