Korean Institute of Surface Engineering

pISSN : 1225-8024 | eISSN : 3399-8403


공학

Study on Passive Layer Characteristics of Chemically Passivated Duplex Stainless Steel
화학적 부동태 처리에 따른 듀플렉스 스테인리스 강의 피막 특성에 관한 연구

장휘운;이정훈;김용환;정원섭;
[Jang, Heui-Un;Lee, Jung-Hoon;Kim, Yong-Hwan;Chung, Won-Sub;]

부산대학교 재료공학과;
Department of Materials Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 45, No. 6, pp. 219-225.

DOI : 10.5695/JKISE.2012.45.6.219

Characteristics of Carburized Surface Layers in 0.18C-3.5Ni-1.5Cr-0.2Mo Steels for Main Shaft Bearings of Wind Turbines
풍력발전시스템의 주 베어링용 0.18C-3.5Ni-1.5Cr-0.2Mo강의 침탄 표면특성

최병영;구윤식;
[Choi, Byung-Young;Gub, Yoon-Sik;]

전북대학교 신소재공학부 및 신소재개발연구센터;전북대학교 대학원 금속공학과;
School of Advanced Materials Engineering and Research Institute of Advanced Materials Development, Chonbuk National University;Graduate School of Metallurgical Engineering, Chonbuk National University;

한국표면공학회지, Vol. 45, No. 6, pp. 226-231.

DOI : 10.5695/JKISE.2012.45.6.226

Syntheses and Properties of Quaternary Cr-Ti-B-N Coatings by a High Power Impulse Magnetron Sputtering Technique

;;;;;
[Myoung, Hee-Bok;Zhang, Teng Fei;Park, Jong-Keuk;Kim, Doo-In;Kim, Kwang Ho;]

School of Materials Science and Engineering, Pusan National University;Electronic Materials Center, Korea Institute of Science and Technology;National Core Research Center for Hybrid Materials Solution, Pusan National University;

한국표면공학회지, Vol. 45, No. 6, pp. 232-241.

DOI : 10.5695/JKISE.2011.45.6.232

High Temperature Durability Amorphous ITO:Yb Films Deposited by Magnetron Co-Sputtering

;;
[Jung, Tae Dong;Song, Pung Keun;]

National Core Research Center for Hybrid Materials Solution, Pusan National University;Department of Materials Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 45, No. 6, pp. 242-247.

DOI : 10.5695/JKISE.2012.45.6.242

A Study on the Surface Pre-treatment of Palladium Alloy Hydrogen Membrane
팔라듐 합금 수소 분리막의 전처리에 관한 연구

박동건;김형주;김효진;김동원;
[Park, Dong-Gun;Kim, Hyung-Ju;Kim, Hyo Jin;Kim, Dong-Won;]

경기대학교 신소재공학과;
Department of Advanced Materials Engineering, Kyonggi University;

한국표면공학회지, Vol. 45, No. 6, pp. 248-256.

DOI : 10.5695/JKISE.2012.45.6.248

Effects of Bilayer Period on the Microhardness and Its Strengthening Mechanism of CrN/AlN Superlattice Coatings

;;;;;
[Kim, SungMin;Kim, EunYoung;Kim, DongJun;La, JoungHyun;Lee, SangYul;]

Center for Surface Technology and Applications, Department of Material Engineering, Korea Aerospace University;

한국표면공학회지, Vol. 45, No. 6, pp. 257-263.

DOI : 10.5695/JKISE.2012.45.6.257

Behaviors of Cavitation Damage in Seawater for HVOF Spray Coated Layer with WC-10Co4Cr on Cu Alloy
WC-10Co4Cr으로 초고속 화염용사 코팅된 Cu 합금의 해수내 캐비테이션 손상 거동

한민수;김민성;장석기;김성종;
[Han, Min-Su;Kim, Min-Sung;Jang, Seok-Ki;Kim, Seong-Jong;]

목포해양대학교 기관시스템공학부;(주)디섹;
Faculty of Marine Engineering, Mokpo Maritime University;DSEC;

한국표면공학회지, Vol. 45, No. 6, pp. 264-271.

DOI : 10.5695/JKISE.2012.45.6.264

Evaluation on Potentiostatic Characteristics of Al-4.06Mg-0.74Mn Alloy with Cavitation Environment in Seawater
Al-4.06Mg-0.74Mn 합금의 해수 내 캐비테이션 환경에 따른 정전위 특성 평가

이승준;한민수;장석기;김성종;
[Lee, Seung-Jun;Han, Min-Su;Jang, Seok-Ki;Kim, Seong-Jong;]

목포해양대학교 기관시스템공학부;
Division of Marine Engineering, Mokpo Maritime University;

한국표면공학회지, Vol. 45, No. 6, pp. 272-277.

DOI : 10.5695/JKISE.2012.45.6.272

Characteristics Evaluation with Cavitation Condition of 304 Stainless Steel in Seawater Environment
해수 환경 하에서 304 스테인리스강의 캐비테이션 조건에 따른 특성 평가

장석기;정상옥;한민수;김성종;
[Jang, Seok-Ki;Chong, Sang-Ok;Han, Min-Su;Kim, Seong-Jong;]

Division of Marine Engineering, Mokpo Maritime University;

한국표면공학회지, Vol. 45, No. 6, pp. 278-283.

DOI : 10.5695/JKISE.2012.45.6.278

The Influence of Hydrogen Charging with the Volume Fraction of Phases in Dual Phase Steels
다상조직강의 조직 분율에 따른 수소주입의 영향

김한상;강계명;
[Kim, Han-Sang;Kang, Kae-Myung;]

가천대학교 기계.자동차공학과;서울과학기술대학교 신소재공학과;
Dept. of Mechanical and Automotive Engineering, Gachon University;Dept. of Materials Science and Engineering, Seoul National University of Science & Technology;

한국표면공학회지, Vol. 45, No. 6, pp. 284-288.

DOI : 10.5695/JKISE.2012.45.6.284