Korean Institute of Surface Engineering

pISSN : 1225-8024 | eISSN : 3399-8403


공학

A.C. Impedance Properties of HA/Ti Compound Layer coated Ti-30Ta-(3~15)Nb Alloys
Ti-30Ta-(3~15)Nb 합금에 HA/Ti 복합 코팅한 표면의 교류임피던스 특성

정용훈;이호종;문영필;박근형;장승현;손미경;최한철;
[Jeong, Y.H.;Lee, H.J.;Moong, Y.P;Park, G.H.;Jang, S.H.;Son, M.K.;Choe, H.C.;]

조선대학교 치과대학 생체재료학교실 및 생체재료나노계면활성화센터, 2단계 BK21;순천대학교 공과대학 미래전략신소재공학;
Department of Dental Materials & Research Center of Nano-Interface Activation for Biomaterials, College of Dentistry, 2nd Stage of Brain Korea 21 for College of Dentistry;Department of Materials Science & Metallurgical Engineering, Suchon National University;

한국표면공학회지, Vol. 41, No. 5, pp. 181-188.

DOI : 10.5695/JKISE.2008.41.5.181

The Etch Characteristics of TiN Thin Film Surface in the CH4 Plasma
CH4 플라즈마에 따른 TiN 박막 표면의 식각특성 연구

우종창;엄두승;김관하;김동표;김창일;
[Woo, Jong-Chang;Um, Doo-Seung;Kim, Gwan-Ha;Kim, Dong-Pyo;Kim, Chang-Il;]

중앙대학교 전자전기공학부;
School of Electrical and Electronics Engineering, Chung-Ang University;

한국표면공학회지, Vol. 41, No. 5, pp. 189-193.

DOI : 10.5695/JKISE.2008.41.5.189

Surface Modification of Multi-walled Carbon Nanotubes for Enhancement of Dispersion and Electrochemical Properties

;;;;
[Kim, Young-Ja;Zhang, Wentao;Lee, Hong-Ro;Kim, Jong-Hyee;]

Department of Applied Materials Engineering, Chungnam National University;Div. of Future Fundamental Technology Research, Korea Institute of Energy Research;

한국표면공학회지, Vol. 41, No. 5, pp. 194-198.

DOI : 10.5695/JKISE.2008.41.5.194

Performance of OLED Fabricated on the ITO Deposited by Facing Target Sputtering
대향식 스퍼터링법으로 증착된 ITO 양극 위에 제작된 OLED 성능

윤철;김상호;
[Yoon, Chul;Kim, Sang-Ho;]

한국기술교육대학교 신소재공학과;
Dept. of Materials Engineering, Korea University of Technology and Education;

한국표면공학회지, Vol. 41, No. 5, pp. 199-204.

DOI : 10.5695/JKISE.2008.41.5.199

Characterization of a Magnetron Sputtering Cathode by a 3D Particle Model
3차원 입자 모델을 이용한 마그네트론 스퍼터링 음극의 특성 분석

주정훈;
[Joo, Jung-Hoon;]

군산대학교 공과대학 신소재공학과, 플라즈마 소재 응용 센터;
Department of Materials Science and Engineering and Plasma Materials Research Center, Kunsan National University;

한국표면공학회지, Vol. 41, No. 5, pp. 205-213.

DOI : 10.5695/JKISE.2008.41.5.205

Effect of RF Superimposed DC Magnetron Sputtering on Electrical and Bending Resistances of ITO Films Deposited on PET at Low Temperature
DC마그네트론 스퍼터링법으로 PET 기판위에 저온 증착한 ITO박막의 비저항과 굽힘 저항성에 대한 RF인가의 영향

박미랑;이성훈;김도근;이건환;송풍근;
[Park, Mi-Rang;Lee, Sung-Hun;Kim, Do-Geun;Lee, Gun-Hwan;Song, Pung-Keun;]

부산대학교 재료공학부;한국기계연구원 부설 재료연구소;
Department of Materials Science and Engineering, Pusan National University;Surface Technology Research Center, Korea Institute of Materials Science (KIMS);

한국표면공학회지, Vol. 41, No. 5, pp. 214-219.

DOI : 10.5695/JKISE.2008.41.5.214

Microstructure and Tribological Properties along with Chemical Composition and Size of Initial Powder in Fe-based BMG Coating through APS
대기 플라즈마 용사공정을 이용한 Fe계 벌크 비정질 금속 코팅의 초기 분말의 화학조성과 크기에 대한 미세 조직 및 마모 특성

김정환;윤상훈;나현택;이창희;
[Kim, Jung-Hwan;Yoon, Sang-Hoon;Na, Hyun-Taek;Lee, Chang-Hee;]

한양대학교 신소재공학부;
Division of Advanced Materials Science & Engineering, Hanyang University;

한국표면공학회지, Vol. 41, No. 5, pp. 220-225.

DOI : 10.5695/JKISE.2008.41.5.220

Electrochemical Characteristics of Dental Implant in the Various Simulated Body Fluid and Artificial Saliva
다양한 유사체액과 인공타액에서 치과용 임플란트의 전기화학적 특성

김태한;박근형;손미경;김원기;장승현;최한철;
[Kim, T.H.;Park, G.H.;Son, M.K.;Kim, W.G.;Jang, S.H.;Choe, H.C.;]

조선대학교 치과대학 생체재료학교실 및 생체재료나노계면활성화센터, 2단계 BK21;
Department of Dental Materials & Research Center of Nano-Interface Activation for Biomaterials, College of Dentistry, 2nd Stage of Brain Korea 21 for College of Dentistry;

한국표면공학회지, Vol. 41, No. 5, pp. 226-231.

DOI : 10.5695/JKISE.2008.41.5.226

Surface Characteristics and Electrochemical Behaviors of TiN and ZrN Coated Orthodontic Mini-screw
ZrN 및 TiN 코팅된 치과교정 용 미니나사의 표면특성과 전기화학적 거동

김신영;문영필;박근형;조호형;김원기;손미경;최한철;
[Kim, S.J.;Moon, Y.P.;Park, G.H.;Jo, H.H.;Kim, W.G.;Son, M.K.;Choe, H.C.;]

조선대학교 치과대학 생체재료학교실 및 생체재료나노계면활성화센터, 2단계 BK21;
Department of Dental Materials & Research Center of Nano-Interface Activation for Biomaterials, College of Dentistry, 2nd Stage of Brain Korea 21 for College of Dentistry;

한국표면공학회지, Vol. 41, No. 5, pp. 232-239.

DOI : 10.5695/JKISE.2008.41.5.232

Surface and Photolytic Characteristics of Ni-TiO2 Composite Layer Electro-Plated from Non-Aqueous Electrolyte
비수용액 전해질에서 전기도금한 니켈-TiO2 복합 도금층의 표면 및 광분해 특성 연구

조일국;지창욱;최철영;김영석;김양도;
[Jo, Il-Guk;Ji, Chang-Wook;Choi, Chul-Young;Kim, Young-Seok;Kim, Yang-Do;]

부산대학교 재료공학부;한국생산기술연구원 동남권기술지원본부 수송기계부품지원센터;
School of Materials Science and Engineering, Pusan National University;Division for Dongnam Area Technology Service, Korea Institude of Industrial Techology;

한국표면공학회지, Vol. 41, No. 5, pp. 240-244.

DOI : 10.5695/JKISE.2008.41.5.240

Development of Porous Metal Mold Material using Vacuum Sintering Method
진공 소결 방식을 이용한 통기성 금형 소재 개발

김동원;조규일;김현근;강자연;이원혁;황금철;
[Kim, Dong-Won;Cho, Kyu-Il;Kim, Hyun-Keun;Kang, Ja-Youn;Rhee, Won-Hyuk;Hwang, Keum-Cheol;]

경기대학교 재료공학과;(주)대화알로이테크;
Department of Advanced Materials Engineering, Kyonggi University;Daehwa Alloytech Co., Ltd;

한국표면공학회지, Vol. 41, No. 5, pp. 245-253.

DOI : 10.5695/JKISE.2008.41.5.245