Korean Institute of Surface Engineering

pISSN : 1225-8024 | eISSN : 3399-8403


공학

Synthesis and Characteristics of New Quaternary Superhard Ti-Mo-Si-N Coatings
새로운 고경도 Ti-Mo-Si-N 코팅막의 합성 및 기계적 특성

전진우;홍승균;김광호;
[Jeon, Jin-Woo;Hong, Seung-Gyun;Kim, Kwang-Ho;]

부산대학교 재료공학부;
Division of Materials Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 39, No. 6, pp. 245-249.

DOI :

Effect of Hydrogen Partial Pressure Ratio on Electrical and Structural Properties of ZnO Thin Film
ZnO 박막의 전기적 구조적 특성에 미치는 수소 분압비의 영향

이성훈;신민근;변응선;김도근;전상조;구본흔;
[Lee, Sung-Hun;Shin, Min-Geun;Byon, Eung-Sun;Kim, Do-Geun;Jeon, Sang-Jo;Koo, Bon-Heun;]

한국기계연구원 표면기술연구센터;창원대학교 전자재료실험실;국방기술품질원 부산센터;
Surface Engineering Research Center, Korea Institute of Machinery and Materials;Changwon National University;Busan Center, Defense Agency for Technology and Quality;

한국표면공학회지, Vol. 39, No. 6, pp. 250-254.

DOI :

The Effect of Cu Reflow on the Pd-Cu Alloy Membrane Formation for Hydrogen Separation
수소분리용 Pd-Cu 합금 분리막의 Cu Reflow 영향

문진욱;김동원;
[Mun, Jin-Uk;Kim, Dong-Won;]

경기대학교 재료공학과;
Department of Advanced Materials Engineering, Kyonggi University;

한국표면공학회지, Vol. 39, No. 6, pp. 255-262.

DOI :

Deposition of (Ti, Cr, Zr)N-$MoS_{2}$ Thin Films by D.C. Magnetron Sputtering

;;
[Kim, Sun-Kyu;Vinh, Pham-Van;]

School of Materials Science and Engineering, University of Ulsan;

한국표면공학회지, Vol. 39, No. 6, pp. 263-267.

DOI :

Study on the Effect of Sputtering Process on the Adhesion Strength of CrZrN Films Synthesized by a Duplex Surface Treatment Process
복합표면처리된 CrZrN 박막의 밀착력에 미치는 스퍼터링 효과에 관한 연구

김명근;김은영;이상율;
[Kim, M.K.;Kim, E.Y.;Lee, S.Y.;]

플라즈마 응용 표면기술연구센터;
Center for Advanced Plasma Surface Technology;

한국표면공학회지, Vol. 39, No. 6, pp. 268-275.

DOI :

Comparison of the Characteristics of Cu-Sn and Ni Pre-Plated Frames Prepared by Electro-Plating
전기도금된 Cu-Sn과 Ni preplated frame의 특성 비교

이대훈;장태석;홍순성;이지원;양형우;한병근;
[Lee, D.H.;Jang, T.S.;Hong, S.S.;Lee, J.W.;Yang, H.W.;Hahn, B.K.;]

선문대학교 전자재료공학과;(주)아큐텍반도체기술 R&D team;
Dept. of Electronic Materials Eng., Sunmoon Univ.;R&D Team, Acqutek Semiconductor and Technology Co., Ltd.;

한국표면공학회지, Vol. 39, No. 6, pp. 276-281.

DOI :

Viscosities of $LaCl_3-NaCl$ Binary Melts
$LaCl_3-NaCl$ 2성분계 용융염의 점도

김기호;
[Kim, Ki-Ho;]

충북대학교 신소재공학과;
Materials Eng. Dep`t, Chungbuk National University;

한국표면공학회지, Vol. 39, No. 6, pp. 282-287.

DOI :

The Effect of $Y_2O_3$ Dispersoids on the High Temperature Oxidation of Ti-34wt%Al-1.5wt%Mn Alloys
Ti-34wt%Al-1.5wt%Mn 합금의 고온산화에 미치는 $Y_2O_3$ 분산입자 첨가효과

이동복;
[Lee, Dong-Bok;]

성균관대학교 신소재공학부;
School of Advanced Materials Science & Engineering, Sungkyunkwan University;

한국표면공학회지, Vol. 39, No. 6, pp. 288-294.

DOI :

Comparison of HVOF Thermal Spray Coatings of T800 and WC-Co Powders

;;;;;;;;
[Cho, T.Y.;Yoon, J.H.;Kim, K.S.;Baek, N.K.;Song, K.O.;Youn, S.J.;Hwang, S.Y.;Chun, H.G.;]

School of Nano Advanced Materials Engineering, Changwon National University;Sermatech Korea Co., Ltd.;Research Institute of Industrial Science & Technology;School of Materials Science & Engineering, University of Ulsan;

한국표면공학회지, Vol. 39, No. 6, pp. 295-301.

DOI :

Effects of Alloying Elements on the Surface Characteristics of Pb-Substrate for Battery
Pb-기판의 표면특성에 미치는 합금원소의 영향

오세웅;최한철;
[Oh, S.W.;Choe, H.C.;]

세방전지기술연구소;조선대학교 치과대학;
Institute of Sebang Global Battery Co., Ltd.;Department of Dental Materials & Research Center of Nano-Interface Activation for Biomaterials, College of Dentistry, Chosun University;

한국표면공학회지, Vol. 39, No. 6, pp. 302-311.

DOI :